-
What should I ask before ordering a concrete tile roof in South Florida?
-
Is epoxy floor coating cheaper than tile?
-
Why do small orders get treated like a hassle?
-
How do I know the quoted price is the real price?
-
What paperwork should a tile vendor hand me?
-
Do "recyclable" or "recycled content" claims on tile actually mean anything?
-
Am I supposed to handle every facilities request that lands on my desk?
I'm not a tile setter. I'm the office administrator who orders the tile — plus the underlayment, the freight, and whatever else doesn't fit neatly into a job description. We're a 130-person property management and light commercial build-out company in South Florida, and I run roughly $190,000 a year in materials purchasing across nine vendors. I answer the same handful of questions from new project managers every few months. So I wrote them down.
What should I ask before ordering a concrete tile roof in South Florida?
Concrete tile roof, South Florida: the rules here are different, and everybody asks the wrong question first.
They ask about price per square. Almost nobody asks about wind rating, and that's the question that decides whether your roof passes inspection. South Florida sits in the High Velocity Hurricane Zone, which means the tile needs a product approval number — a Miami-Dade NOA or a Florida Product Approval — and the underlayment spec matters as much as the tile itself. I've watched a project stall for three weeks because the tile was approved but the attachment method wasn't. Ask for the approval document, not a verbal "yeah, it's rated."
Then ask about dye lot and lead time. Concrete tile is a cement product; color shifts batch to batch, and a 40-square order pulled from two runs will show on the wall. Get the dye lot number in writing. Lead times on our 2024 projects ran 4–8 weeks, and freight is a separate line you should see before you sign anything.
Is epoxy floor coating cheaper than tile?
Sometimes. That's the honest answer, and it depends on where the floor is.
Garage, back-of-house corridor, warehouse, mechanical room — epoxy floor coating is a no-brainer on cost. Installed cost ran well under tile in our comparables, and there's no grout line collecting whatever Florida tracks in. Commercial-grade epoxy with a proper base coat and topcoat ballparked at $4–8 per square foot in quotes we collected in 2024 (verify current pricing — resin costs move).
Where it falls apart: sunrooms and anything with UV exposure, because epoxy yellows. And slabs with moisture problems. Florida slabs are humid, and epoxy over a slab still emitting vapor will blister inside a year. We had a 1,200-square-foot break room bubble up in 2022 because nobody tested moisture before coating. Tile doesn't care about vapor the same way.
Also ask about the recoat cycle. Epoxy isn't permanent — figure 5–8 years in high traffic. Compare 10-year costs and the gap narrows fast.
Why do small orders get treated like a hassle?
Because they're inconvenient, and a lot of suppliers would rather not say so out loud.
Look, I get the economics. A 300-square-foot bathroom isn't moving anyone's quarterly number. But here's the thing: in 2021 I needed 11 boxes of porcelain for a single-unit renovation. Three Florida tile & stone suppliers wouldn't quote it — two cited minimum order, one just stopped replying. The fourth, the team at florida-tile, asked what the project was, quoted it, and delivered in four days.
That was a $600 order. The same account has since handled roughly $90,000 of our work. Small doesn't mean unimportant — it means they haven't decided yet. When a supplier quotes a minimum before asking a single question about the project, that's a red flag for how they'll handle problems later.
To be fair, minimums exist for real reasons: setup, freight, cutting trim. A good supplier explains the minimum and offers a workaround. A bad one quotes it and waits for you to go away.
How do I know the quoted price is the real price?
The question everyone asks is "what's your best price?" The question they should ask is "what's on this quote, line by line?"
Most buyers focus on the per-square-foot number and completely miss everything stacked behind it: freight, liftgate fees, pallet deposits, sample costs, bullnose and trim pieces, breakage allowance, and the restocking fee if the job shrinks. I've seen a quote that looked 15% cheaper than the next one until freight and trim landed — then it was 8% more expensive. Same tile, different math.
Ask for freight as its own line. Ask how long the quote holds, because 7 days and 30 days are wildly different when your GC is still bidding. Ask what happens if you're three boxes short at close-out — you will be three boxes short. And ask whether cutting and bullnose are included, since that's the deal-breaker nobody flags upfront.
What paperwork should a tile vendor hand me?
This is the part nobody warns you about, and it's the part that gets me in trouble with finance.
In 2022 I found a great price on quarry tile — about $1,900 under our regular supplier. Ordered it. What showed up with the pallet was a handwritten receipt. No itemized invoice, no PO number. Finance rejected the expense report and I ate $2,400 out of the department budget, because the purchase didn't reconcile with anything in the system. I verify invoicing capability before I place an order now. No exceptions.
The baseline list: a W-9, a certificate of insurance, an itemized invoice that matches the PO line for line, and signed lien waivers if subs are involved. For tax-exempt jobs, the exemption certificate on file before the first delivery.
None of this is exciting. It's also the difference between a clean close-out and three weeks of emails in March.
Do "recyclable" or "recycled content" claims on tile actually mean anything?
They mean something only if there's a document behind them.
Our marketing team wanted "recyclable tile" on a brochure for a LEED project in 2024. I made a call before anything went to print.
Per the FTC Green Guides (16 CFR Part 260), environmental claims must be substantiated with competent and reliable evidence. A "recyclable" claim requires that recycling facilities be available to a substantial majority of consumers — generally pegged at 60% — where the product is sold.
That's a much narrower claim than the word suggests. What actually helps on a commercial job: environmental product declarations (EPDs), health product declarations (HPDs), and a manufacturer letter stating recycled content percentage. Ask for those instead of the marketing PDF. If a supplier can't produce them in 48 hours, the claim is decoration.
Am I supposed to handle every facilities request that lands on my desk?
No, and it took me two years to figure that out.
The job creep is real. In 2023 I spent one morning sourcing a foil shaver for a furnished rental because a tenant asked the front desk, and one afternoon on how to get rid of gnats in house after house across three buildings — because I'm "the purchasing person," and purchasing apparently means everything.
The filter I use now: is it tile and stone, is it a licensed trade, or is it a supply order somebody else owns? The gnats question actually turned out to be the useful one. The units with the worst complaints had failing grout and a shower pan that had been leaking into the subfloor for months. The pests were the symptom. So I called pest control, then called the tile crew, and the complaints stopped.
Which is the whole lesson: know what your vendor actually does, and don't hand a tile supplier a problem that isn't a tile problem.